BTEX and VOC Emissions: What Oil and Gas Operators Need to Know

Oil and gas processing equipment associated with BTEX emissions.

Article Overview

BTEX emissions and other volatile organic compounds can be released during storage, processing, transfer, venting, and maintenance activities in oil and gas operations. These hydrocarbon vapours may occur alongside hydrogen sulfide, creating treatment requirements that extend beyond H₂S control alone. This article explains where BTEX and VOC emissions develop, why they require management, and how operators can plan treatment for mixed emission streams.

What Are BTEX and VOC Emissions?

BTEX refers to benzene, toluene, ethylbenzene, and xylenes, a group of volatile hydrocarbons that may be present in crude oil, condensate, natural gas, produced water, and process vapours. These compounds are part of the broader category of volatile organic compounds, or VOCs.

Because these compounds can move into the vapour phase as pressure, temperature, and fluid conditions change, emissions may occur even when the source fluid remains contained for much of the process. Releases can increase when hydrocarbons are transferred into atmospheric storage, heated, agitated, depressurized, or exposed during maintenance.

Understanding the composition of the full gas stream is important because an emission point containing BTEX or other VOCs may require different treatment than a stream containing H₂S alone.

Where Are BTEX and VOCs Released in Oil and Gas Operations?

BTEX and VOC emissions can develop anywhere volatile hydrocarbons move from a liquid or gas stream into the atmosphere or a controlled vent system.

Common release points include:

  • Crude oil, condensate, and produced-water storage tanks
  • Separator and process equipment vents
  • Dehydration and gas-processing equipment
  • Truck loading, unloading, and fluid transfer points
  • Tank and vessel depressurization
  • Pipeline purging and blowdown activities
  • Maintenance, shutdown, and turnaround work

Operating conditions can change the amount of vapour released. Pressure reduction, rising temperature, increased flow, tank filling, and fluid agitation can all affect the gas reaching a vent or treatment point.

These conditions are especially important during planned maintenance. Our article H₂S Management: Preparing for Safe Shutdown and Turnaround Operations explains how changing vent points, depressurization, purging, and residual fluids can create temporary emissions that need to be considered before work begins.

Why Do BTEX Emissions Require a Different Approach Than H₂S?

H₂S and BTEX may be present in the same gas stream, but they are different compounds and do not necessarily respond to the same treatment method.

An H₂S scrubber is designed around hydrogen sulfide loading, gas flow, chemistry, and required outlet concentration. Treating H₂S successfully does not automatically mean that hydrocarbons or VOCs in the same stream have also been controlled.

For this reason, operators should identify the full composition of the emission stream before selecting equipment. Our article How the H₂S Scrubbing Process Works in Real-World Operations explains how H₂S scrubbers create a controlled treatment point for sour gas. When BTEX or other VOCs are also present, additional or complementary treatment may be required.

Mixed Emissions Require a Broader Control Strategy

Mixed streams are common where sour fluids also contain volatile hydrocarbons. A storage tank, separator, vacuum truck, or maintenance vent can release H₂S and hydrocarbon vapours at the same time.

For example, during a vessel cleanout, residual sour hydrocarbons may continue releasing vapours as the equipment is drained and depressurized. Monitoring may identify H₂S, but the vent stream may also contain BTEX and other VOCs. Selecting treatment only around the H₂S concentration could leave the hydrocarbon portion of the stream insufficiently addressed.

In this type of application, operators may need a staged treatment approach. H₂S can be treated at one point in the process while hydrocarbon vapours are captured or destroyed through equipment selected for BTEX and VOC control.

How Are BTEX and VOC Emissions Controlled?

The appropriate method depends on gas composition, vapour flow, concentration, operating duration, available utilities, and the required treatment outcome.

AMGAS BTEX Removal solutions can be used where BTEX and VOCs require targeted treatment. This type of control can also form part of a broader treatment setup when the same gas stream contains both sour gas and hydrocarbon contaminants.

For streams suited to combustion-based control, Thermal Oxidizers & Combustors provide another option for managing hydrocarbon and VOC emissions. These systems may be applied to tank vapours, casing gas, dehydration vapours, vessel depressurization, and other appropriate waste-gas streams.

The important distinction is that equipment should be selected around the contaminants actually present rather than assuming one treatment method will address every component.

What Should Operators Consider When Selecting Treatment?

Treatment planning should begin with representative information about the emission stream and how it changes during operation.

Operators should consider:

  • H₂S, BTEX, and other VOC concentrations
  • Total gas or vapour flow rate
  • Hydrocarbon composition
  • Pressure and temperature
  • Whether releases are continuous or intermittent
  • Expected changes during filling, transfer, purging, or maintenance
  • Available treatment space and utilities
  • Required emissions or site-specific performance targets

Sampling and monitoring should also occur at points that reflect actual operating conditions. A gas stream measured during steady production may behave differently during tank filling, equipment depressurization, or a turnaround.

What Should Operators Understand About BTEX Emissions?

Effective BTEX emissions control starts with understanding that sour-gas treatment and hydrocarbon-vapour treatment are not interchangeable. A stream may contain H₂S, BTEX, other VOCs, or a combination of these contaminants, and the treatment strategy should reflect the complete emission profile.

When operators evaluate gas composition, flow, release points, operating changes, and the required treatment outcome together, they can select controls that address the full stream rather than one contaminant in isolation.

Use the form below to contact our team and discuss an emissions-control approach for BTEX, VOCs, H₂S, or mixed gas streams at your operation.